View Profile
Publication details for Dr Huashan Bao
Ma, Zhiwei, Bao, Huashan & Roskilly, Anthony Paul (2017). Principle investigation on advanced absorption power generation cycles. Energy Conversion and Management 150: 800-813.- Publication type: Journal Article
- ISSN/ISBN: 0196-8904 (print)
- DOI: 10.1016/j.enconman.2017.02.078
- Further publication details on publisher web site
Author(s) from Durham
Abstract
Aiming at exploring advanced absorption power generation (APG) cycles using ammonia-water as working solution, the present study has studied one double-effect, one half-effect and one ejector-combined APG cycles based on one of the most widely studied APG cycles – Kalina KCS-11. The performance of these advanced cycles were numerically analyzed and compared against KCS-11 in terms of power output, energy and exergy efficiencies. An optimal mass fraction of ammonia-water solution used in KCS-11 has been identified to achieve the maximum energy and exergy efficiencies, which were 0.09–0.14 and 0.65–0.72 respectively when using 70.0–100.0 °C boiling temperature; however, the corresponding power output was only 23.0–48.0% of its maximum potential. The double-effect APG cycle could effectively improve the energy and exergy efficiencies by 3.6–12.6%, 10.7–28.2% and 19.0–900.0% respectively when using 100.0 °C, 120.0 °C and 140.0 °C boiling temperature; but its power output capacity was about 43.0–63.0% lower. The half-effect cycle could provide larger pressure ratio for power generation, which amplified the power output by 50.0–85.0% but sacrificed its energy and exergy efficiencies by 4.0–45.0% compared to that of KCS-11. To pursue higher energy and exergy efficiencies without a bulky two-stage system, one can replace the throttling valve and mixer in KCS-11 by an ejector to form a ejector-combined APG cycle, which could improve the system energy efficiency by 2.9–6.8% when using 80.0–100.0 °C boiling temperature, while the power output capacity was only slightly influenced.