Cookies

We use cookies to ensure that we give you the best experience on our website. You can change your cookie settings at any time. Otherwise, we'll assume you're OK to continue.

Durham University

Department of Engineering

Staff Profile

Publication details for Dr Ashraf Osman

Osman, A. S. & Bolton, M. D. (2005). Simple plasticity-based prediction of the undrained settlement of shallow circular foundations on clay. Géotechnique 55(6): 435-447.

Author(s) from Durham

Abstract

A kinematic plastic solution has been developed for the penetration of a circular footing into an incompressible soil bed. In this solution, the pattern of deformation around the footing is idealised by a simple plastic deformation mechanism. Strain-hardening behaviour and nonlinear stress–strain characteristics are incorporated. This application is different from conventional applications of plasticity theory as it can approximately predict both stresses and displacements under working conditions. This approach therefore provides a unified solution for design problems in which both serviceability and safety requirements are based directly on the stress–strain behaviour of the soil. The design strength that should limit the deformations can be selected from the actual stress– strain data recorded from a carefully specified location, and not derived using empirical safety factors. The validity of this design approach is examined against nonlinear finite element analyses and field measurements of foundations on clay under short-term loading.

References

Atkinson, J. H., Richardson, D. & Stallebrass, S. E. (1990). Effect
of recent stress history on the stiffness of overconsolidated soil.
Ge´otechnique 40, No. 4, 531–540.
Bolton, M. D. & Powrie, W. (1988). Behaviour of diaphragm walls
in clay prior to collapse. Ge´otechnique 38, No. 2, 167–189.
Bolton, M. D. & Sun, H. W. (1991). Modelling of bridge abutments
on stiff clay. Proc. 10th Eur. Conf. Soil Mech., Florence 1,
51–55.
Bolton, M. D., Dasari, G. R. & Britto, A. M. (1994). Putting small
strain non-linearity into Modified Cam Clay model. Proc. 8th
Conf. Int. Assoc. Computer Methods and Advances in Geomechanics,
Morgantown, WV, 537–542.
Brinch Hansen, J. (1970). A revised and extended formula for
bearing capacity. Dan. Geotech. Inst. Bull. 28, 5–11.
Burland, J. B. (1989). ‘Small is beautiful’: the stiffness of soils at
small strains. 9th Laurits Bjerrum Memorial Lecture. Can.
Geotech. J. 26, No. 4, 449–516.
Butterfield, R. & Harkness, R. M. (1971). The kinematics of
Mohr–Coulomb materials: stress–strain behaviour of soils. Proceedings
of the Roscoe Memorial Symposium, Cambridge, pp.
220–233.
Chen, W. F. (1975). Limit analysis and soil plasticity. Amsterdam:
Elsevier.
Cox, A. D. (1962). Axially symmetric plastic deformations in soils.
II: Indentation of ponderable soils. Int. J. Mech. Sci. 4,
371–380.
Cox, A. D., Eason, G. & Hopkins, H. G. (1961). Axially symmetric
plastic deformations in soils. Phil. Trans. R. Soc. London Ser. A
254, No. 1036, 1–45.
Dasari, G. R. (1996). Modelling the variation of soil stiffness during
sequential construction. PhD dissertation, University of Cambridge.
Dasari, G. R. & Britto, A. M. (1995). Strain-Dependent Modified
446 OSMAN AND BOLTON
Cam Clay model. Technical Report CUED-SOILS/TR276. Cambridge
University Engineering Department, Cambridge.
De´court, L. (1992). SPT in non classical material. Proceedings of
US-Brazil Geotechnical Workshop on Applicability of Classical
Soil Mechanics Principles in Structured Soil, Belo Horizonte,
pp. 67–100.
Eason, G. & Shield, R. T. (1960). The plastic indentation of a semiinfinite
solid by a perfectly rough circular punch. J. Appl. Math.
Phys. (ZAMP) 11, No. 1, 33–43.
Hibbit, Karlsson & Sorensen Inc. (2001). ABAQUS/Standard user’s
manual, version 6.2. Pawtucket, RI: Hibbit, Karlsson & Sorensen
Inc.
Hight, D. W., Bo¨ese, R., Butcher, A. P., Clayton, C. R. I. & Smith,
P. R. (1992). Disturbance of the Bothkennar clay prior to
laboratory testing. Ge´otechnique 42, No. 2, 199–217.
Hill, R. (1950). The mathematical theory of plasticity. Oxford:
Clarendon Press.
Houlsby, G. T. & Wroth, C. P. (1991). Variation of shear modulus
of a clay with pressure and overconsolidation ratio. Soils Found.
31, No. 3, 138–143.
Houlsby, G. T. & Wroth, C. P. (1983). Calculation of stresses on
shallow penetrometers and footings. Proceedings of the IUTAM/
IUGG symposium on seabed mechanics, Newcastle upon Tyne,
pp. 107–112.
Institution of Civil Engineers (1992). Bothkennar soft clay test site:
characterization and lessons learned. Ge´otechnique 42, No. 3,
161–378.
Jardine, R. J., Symes, M. J. & Burland, J. B. (1984). The measurement
of soil stiffness in the triaxial apparatus. Ge´otechnique 34,
No. 3, 323–340.
Jardine, R. J., Potts, D. M., Fourie, A. B. & Burland, J. B. (1986).
Studies of the influence of non-linear stress–strain characteristics
in soil–structure interaction. Ge´otechnique 36, No. 3, 377–396.
Jardine, R. J., Lehane, B. M., Smith, P. R. & Gileda, P. A. (1995).
Vertical loading experiments on rigid pad foundations at Bothkennar.
Ge´otechnique 45, No. 4, 573–597.
Kusakabe, O., Suzuki, H. & Nakase, A. (1986). An upper bound
calculation on bearing capacity of a circular footing on a nonhomogeneous
clay. Soils Found. 26, No. 3, 143–148.
Lehane, B. M. (2003). Vertically loaded shallow foundation on soft
clayey silt. Proc. Inst. Civ. Engrs Geotech. Engng 156, No. 1,
17–26.
Levin, E. (1955). Indentation pressure of a smooth circular punch.
Q. Appl. Math. 13, No. 2, 133–137.
Masing, G. (1926). Eigenspannungen und Verfestigung beim Messing.
Proc. 2nd Int. Cong. Appl. Mech., Zurich, 332–335.
Mayne, P. W. & Kulhawy, F. H. (1982). K0 –OCR relationship in
soils. ASCE J. Geotech. Engng 108, No. 6, 851–872.
Osman, A. S. (2005). Predicting ground displacements in clay
during construction. PhD dissertation, Cambridge University.
Osman, A. S. & Bolton, M. D. (2004). A new design method for
retaining walls in clay. Can. Geotech. J. 41, No. 3, 451–466.
Shield, R. T. (1955a). On plastic flow of metal under conditions of
axial symmetric bearing capacity of the clay. Proc. R. Soc.
London Ser. A, 233, No. 1193, 267–287.
Shield, R. T. (1955b). The plastic indentation of a layer by a flat
punch. Q. Appl. Math. 13, No. 1, 27–46.
Shield, R. T. & Drucker, D. C. (1953). The application of limit
analysis to punch-indentation problems. ASME J. Appl. Mech.
20, No. 4, 453–460.
Skempton, A. W. (1951). The bearing capacity of clay. Proc.
Building Res. Cong., London 1, 180–189.
Skempton, A. W. & Bjerrum, L. (1957). Contribution to the
settlement analysis of foundations on clay. Ge´otechnique 7, No.
4, 168–178.
Tani, K. & Craig, W. H. (1995). Bearing capacity of circular
foundations on soft clay of strength increasing with depth. Soils
Found. 35, No. 4, 21–35.
Wood, D. M. (1990). Soil behaviour and critical state soil mechanics,
1st edn. Cambridge: Cambridge University Press.
Wroth, C. P. (1975). In situ measurement of initial stresses and
deformation characteristics: state-of-the-art review. Proceedings
of the conference on in situ measurement of soil properties,
Raleigh, NC, Vol. 2, pp. 181–230.
Viggiani, G. & Atkinson, J. H. (1995). Stiffness of fine-grained soil
at very small strains. Ge´otechnique 45, No. 2, 249–265.
Yimsiri, S. (2002). Pre-failure deformation characteristics of soils:
anisotropy and soil fabric. PhD thesis, Cambridge University.